The Chelsea 249XMLLX-X4AD or 249XMLLXX4AD is a hydraulic-shift Power Take-Off from the Chelsea 249 Series, engineered specifically for Ford Super Duty trucks with the Ford 6R140 TorqShift 6 automatic transmission. It mounts via a 6-bolt Ford pattern and uses internal pressure lubrication. The 249 Series is the only PTO in its class with a patented noise-suppression system for this transmission, addressing the torsional noise found on most competitive applications. The series supports both 2WD and 4WD applications and carries a torque capacity of 200 lb-ft with output power of 56+ HP. A single hose connection and integrated actuation valve simplify installation and reduce leak paths. Common applications include service trucks, small dump trucks, tow and recovery, and fire and rescue equipment. Call us to confirm the correct output shaft configuration for your specific setup.

• Mounting Type: Ford 6-Bolt
• Shift Type: Hydraulic PowerShift
• Lubrication: Internal Pressure Lube
• Torque Capacity (Series): 200 lb-ft (271 Nm) - check application pages for actual rating
• Output Power (Series): 56+ HP, 42 kW at 1,488 RPM
• Transmission Application: Ford 6R140 TorqShift 6 Automatic
• Vehicle Application: Ford Super Duty (2WD and 4WD)
• NMFC Code: 128520 - Hydraulic PTOs, Pumps, Motors, etc.

The Chelsea 249XMLLX-X4AD belongs to Parker Chelsea's 249 Series, a line developed exclusively for the Ford 6R140 TorqShift 6 transmission. Parker Chelsea documents covering this series include the 247/249/249V/272-F Series Owner's Manual and the 249 Series Parts List (HY25-2249-M1_US). Typical markets for this series include aerial work, water drilling, and other mobile hydraulic applications. The integrated actuation valve eliminates the need for special installation tools and reduces the number of hydraulic connections required. Also referenced as SP249XMLLX-X4AD in some parts catalogs. Contact Pro Gear and Transmission to confirm the right output shaft option for your pump or driveline configuration.